如何在虚拟机下运行chrome os 安装Chrome OS虚拟机后可以怎么玩
首先,需要 安装Vitrual Box 虚拟机;mac ,pc版都可以:
安装虚拟机完成后,新建一个Virtualbox VM 比如命名ChromeOS,类型为linux,other linux。参考的设置参数:设置内存大小 1024 (1 GB) 创建 VDI disk,假设命名chromehd.vdi,设置为Sata,大小(12 GB) , Enable EFI Enable PAE 2个CPU 网络选择 “桥接”[gfw,登陆google 建议使用ss,LAN proxy]
下载CloudReady。 下载完成后文件cloudready-free-44.1.9.bin.zip,解压出cloudready-free-44.1.9.bin 文件。Mac 建议使用The Unarchiver.注意解压出的文件后缀是.bin.
转换文件为vdi. mac 下,在终端中,进入 /Applications/VirtualBox.app./VBoxManage convertfromraw /Users/XX/Downloads/cloudready-free-44.1.9.bin/Users/XX/Downloads/cloudready.vdi等待片刻完成。
设置VitrualBox VM,配置虚拟机ChromeOS。在存储管理标签添加cloudready.vdi,并设置为port 0,chromehd.vdi port为1.
设置完成,启动虚拟机。进入CloudReady 界面。按Ctrl + Alt + F2进入命令行,以下是节选官方手动安装步骤 。使用用户chronos,密码chrome,执行:sudo chromeos-install –skip_src_removable –dst /dev/sdb
When the first screen comes up and asks you to select your network, press Ctrl + Alt + F2.
You will find yourself at a command line.
the username is: chronos
the password is: chrome
FIRST, determine your install destination by running “sudo fdisk -l“
You can look at the device sizes to find out which device is your HDD (usually sda)
To install, type the following commands:
cd /usr/sbin
sudo chromeos-install –dst /dev/sdX
NOTE: If the above cmd fails, try “sudo chromeos-install –skip_src_removable –dst /dev/sdX”
replace “sdX” above with the letter of your drive
Type the password listed above (chrome)
You will be asked to confirm the source and destination – don’t proceed if you aren’t sure (or unconcerned with wiping any device)
When sure, type Y and press enter.
Now you wait. You may see some errors or warnings – don’t worry unless everything fails
As far as I can tell, they can be ignored. Maybe someone can shed some light on the error and the cause. Maybe even a prevention/fix.
The process will take 5-10 minutes.
When the message “Please shutdown, remove the USB device, cross your fingers, and reboot.” appears,
Press CTRL + ALT + F1 to get back to the Welcome screen.
Click Shutdown, remove your USB stick, and reboot.
Marvel in your awesome, you are now !
7.至此,安装完成,暂时不要重启虚拟机,设置cloudready.vdi port 为3 ,大于1就可以,重新启动。
8.多么亲切熟悉的界面:
Google Chrome OS怎么安装~
1
在电脑上安装好Oracle VM VirtualBox和下载好系统包以后,打开Oracle VM VirtualBox虚拟机。点击【新建】
2
新建虚拟电脑输入一个名称,类型选:other 版本:other/Unknown 再点击【下一步】
3
分配给这台虚拟机的的内存大小,本人建议512M以上都是可以的。这要根据你电脑本身的内存来分配。Chrome OS系统在64M内存下都是可以运行的。但是会比较慢。
4
虚拟硬盘选择【使用已有的虚拟硬盘文件】再选择Chrome OS系统包所在的位置点击【打开】---【确定】。此时就那就新建好虚拟系统了。
在启动Chrome OS之前需要设置一下虚拟机,点击【设置】---【系统】----【处理器】选项卡勾选【启用PAE/NX】
再在网络选项处设置一下网卡,按如下图所示设置。如果没有设置这里虚拟机就会上不了网。这样安装Chrome OS也是没有意义的,Chrome OS本身就是基于互联网的操作系统。
全部设置好了以后就点击【启动】
启动了Chrome OS以后需要等待一会,因为这是在虚拟机运行的。进入到Chrome OS设置向导的时候选择【中文(简体中文)】----【继续】。这样运行的Chrome OS系统就是简体中文版的对于英文不是很好的我能更快捷的使用。
点击【继续】以后建议快速按下【ESC】键,这样可以跳过更新,更加节省网络资源。
等一会就会需要登陆你的GMAIL邮箱地址和密码点击【登陆】,登陆以后会自动配置系统。
选择一个桌面图片,选好以后点击【确定】
首次进入Chrome OS以后就如下图所示:可以关闭这个窗口。
关闭首次进入的窗口以后在左下解处点击【Chrome浏览器】图标点击此处。
这样就运行了Chrome浏览器。这样就可以正常使用Chrome OS系统了。
在VMware中点击“File-New Virtual Machine”命令; 在弹出的“New Virtual Machine Wizard”(新建虚拟机向导)窗口选择“Custom”,点击“Next”按钮(如图1);图1 接着点击“Next”按钮;在出现的窗口选择“I Will install the operating system later”(我将以后安装操作系统),点击“Next”按钮(如图2); 图2 接着选择“Guest Operating system”如图3,点击“Next”按钮; 图3 然后修改“Virtual machine name”为“Chrome OS”,将安装位置设置为有较大空间的文件夹,点击“Next”按钮(如图4);图4 接着设置处理器的数量(如图5),点击“Next”按钮;设置虚拟机的内存(如图6),点击“Next”按钮;图5 VMware7安装Chrome OS实战 选择网络类型为桥接(如图7,有家用宽带路由器且开启DHCP建议选择); 图7 然后点击“Next”按钮;选择使用已有的虚拟硬盘(如图8),点击“Next”按钮;选择刚才解压的虚拟硬盘文件,点击“Next”按钮(如图9);图8图9 启动该虚拟机就可以进入Chrome OS系统了(如图10)。图10 搞定,大家继续往下体验吧